Vehicle Signage Design Tips: What to Put on a Business Vehicle

Branded business van showing clear vehicle signage with a readable logo, service information and contact number

The most useful vehicle signage design tips are simple. Show your business name or logo, say what you do in a few words, and give people one easy way to contact you. Add a service area if it helps. Then use large, high-contrast text placed where doors, handles and seams won’t break it up.

Most people see a work vehicle for only a moment, often while they’re driving too. This guide explains what to include, how to arrange it on the side and rear panels, and what to check before you approve the artwork.

Note: This is general design guidance, not legal advice. Licensing rules mentioned here apply in Western Australia and can change, so confirm current requirements with your regulator.

What should vehicle signage include?

Vehicle signage should include your business name or logo, a short description of your service, one main contact method and, where useful, your service area.

  • Business name or logo. This tells people who you are. If your logo has small text or fine lines, make sure the business name is readable on its own.
  • What you do. Use plain words such as “Plumbing and gas” or “Mobile dog grooming”. A creative name like “Apex Solutions” won’t tell anyone you repair air conditioners.
  • One main contact method. This is usually a phone number or a short website address.
  • Service area (optional). A line like “Servicing Perth’s northern suburbs” tells people whether you’ll come to them. It matters most for mobile businesses.

What usually gets cut is the long list of services. Six bullet points might fit on a van door, but nobody can read them at a glance. Pick your main service, or group related work under one short phrase.

Does your vehicle need a licence number?

Some trades must show a licence number on their vehicles. In Western Australia, electrical contractors must display their licence number, which starts with “EC”, in their advertising, including business cards and vehicle signage. 

Building and Energy’s licence number guideline for electrical contractors says each advertisement on the front, back or sides of a vehicle must include the number. It also suggests the number be at least half the size of the largest lettering.

WA’s plumbing regulations also require licence numbers in advertising. If you hold a licence, find out exactly what your regulator requires before the layout is set.

How do you make vehicle signage easy to read?

You make vehicle signage easy to read by giving each element a clear order of importance, then using bold fonts, strong contrast and plenty of empty space.

Set a clear order of importance

Decide what people should notice first, second and third. For most businesses, the name or logo comes first and should be the largest element. The service line comes second, and the contact detail third. That order matters because a viewer who catches only one thing should at least learn who you are. The contact detail still needs to be readable from a distance.

Choose bold, simple fonts

Simple, bold fonts are the easiest to read quickly. Script fonts, very thin lettering and tightly squashed letters can look stylish on a computer screen, then blur into a smudge on a moving van. Use no more than two fonts: one for the name and one for everything else. If your text doesn’t fit, cut words rather than shrinking the letters.

Use strong contrast and empty space

Contrast is the difference between your text colour and the colour behind it. Dark text on a light background, or light text on a dark one, is easiest to read. Your paint is part of the background, so that white lettering won’t stand out on a silver ute. Leave space around each element, too. A panel crammed with words, photos and icons looks busy, and people tend to skip it.

Phone number, website or both: which should you use?

Use the contact method your customers are most likely to act on. A homeowner with a burst pipe will probably call straight away, so a phone number suits urgent work. Someone planning a renovation may want to see reviews or past work first, so a short website address suits them better.

You can show both, but make one clearly larger so they don’t compete for attention.

Whichever you choose, keep it easy to remember. Write phone numbers in familiar groups, such as 0491 570 159, and check that your website address is short enough to recall after a glance. The table below compares the common options.

Contact detail

Works well for

Watch out for

Phone number

Urgent jobs and call-out services

Make sure someone answers it during working hours

Short website address

Quote-based work, portfolios and reviews

Long addresses are hard to recall

Social media handle

Visual businesses with an active account

Only useful if the account stays active

QR code

Vehicles often parked near customers, such as food vans

Can’t be scanned while the vehicle is moving

Social handles and QR codes are extras, not replacements for your main contact method. A QR code only works when someone can walk up to the parked vehicle. Place it at a comfortable height on a panel people can reach safely, away from the traffic side.

Where should information go on the side and rear of a vehicle?

Put key information on flat areas and keep text away from door gaps, handles, deep curves and seams, which can cut words in half or stretch them.

Side panels

The side of a van or ute is your biggest space, but doors, handles, wheel arches and body lines all break it up. A logo placed across a sliding door can look fine when the door is shut and make no sense when it’s open on a job. Plan the layout around how the doors move, not just how the vehicle looks in a side-on photo.

The two sides are often different, too. Many vans have a sliding door on only one side, so a layout that works on the left may need adjusting on the right.

Rear panels

Drivers behind you read the rear while waiting at lights or in traffic, so give it a simple, complete message: name, service and contact.

Rear panels come with their own obstacles. Barn doors split the panel down the middle, so don’t run a phone number across the join. Tailgates have handles and badges, ute trays and canopies have edges and latches, and reversing cameras and lights need clear space. Keep graphics clear of your number plate, too. Transport WA notes that the driver is responsible for keeping the rear number plate visible and legible.

Coverage affects layout, so agree on which panels will carry graphics before artwork starts. For budgeting, see our vehicle signage cost guide before finalising the coverage.

Vehicle signage design tips in action: three examples

The best way to apply these vehicle signage design tips is to cut a cluttered design back to what matters. The three hypothetical examples below show how that works for different businesses and vehicles.

Example 1: a plumber’s van

Before: A script-font business name, a slogan, eight services, four contact methods, social icons and a photo of a tap.

After: The name in bold lettering, “Plumbing, gas and blocked drains”, one large mobile number and the licence number. The rear doors repeat a shorter version, kept off the centre join. The slogan, photo and extra contacts go.

Example 2: a mobile cleaner’s ute

Before: A logo stretched across both doors, a long website address, a price list and a QR code on the tailgate.

After: The logo and “Mobile car and window cleaning” sit on each door, clear of the gap. A short website replaces the long one because customers like checking before-and-after photos. The price list moves to printed flyers customers can take away, and the QR code moves to a side panel so the tailgate stays simple.

Example 3: a mobile coffee van

Before: A full menu with prices on the serving side, the business name in small letters above the window, and nothing on the rear.

After: The name runs large along the top of both sides. The menu moves to a separate board, using digital printing for menus, so it can change without new graphics. A QR code beside the serving window links to the van’s social page. The rear carries the name and a short website.

What should you check before approving vehicle signage artwork?

Check every detail before you approve the artwork, because mistakes are much harder to fix once graphics are printed and fitted.

  • Spelling and contact details: Read every word aloud, call the number and type in the web address.
  • Logo quality: Use the original file from your designer, not a screenshot that may blur at vehicle size. Even high-resolution printing equipment can’t sharpen a low-quality file.
  • Every view: Check the left, right, rear and front separately, and confirm no key text crosses a gap, handle or seam.
  • Licence number: If one is required, confirm it’s current and appears on each side where it’s needed.
  • Content: In WA, a vehicle licence can be cancelled if advertising found offensive by the Ad Standards Community Panel isn’t removed.
  • Branding: Match colours and fonts to your shopfront signage and other materials. If you’re refreshing cards or stationery too, Signs N Print’s business printing services can help keep everything consistent.

Once everything checks out, explore our vehicle signage services for help turning your approved design into finished graphics. 

What’s the best way to test your vehicle signage design?

The best test is a quick glance from someone who doesn’t know your business. Show them the mock-up for three to five seconds, then take it away and ask two questions: what does this business do, and how would you contact it? If they can’t answer both, the design needs simplifying. Remove something before adding anything new.

Next, test the design at a realistic size and distance. Print the side view on an A4 sheet, stick it on a wall and step back several metres. Text that looks clear on a laptop screen can shrink to a blur from there. Check the rear view the same way, because that’s the panel people read while waiting behind you in traffic.

Finally, look at the mock-up in black and white. If the name and contact details fade into the background, your colours need more contrast.

Signs N Print can help with your vehicle signage

Signs N Print is a locally owned signage and printing business in Osborne Park that creates custom vehicle graphics for Perth businesses, including partial wraps, full wraps and fleet branding, with professional installation.

Contact the team with your vehicle’s make and model, the panels you’d like covered and any artwork you already have, and you’ll receive a no-obligation quote.

Frequently asked questions

Should every vehicle in a fleet use the same layout?

Keep the same colours, order of information and contact details across the fleet, but adjust the placement for each body shape. A layout that fits a van may hit a handle or seam on a ute.

What if my logo is hard to read from a distance?

Many logos are designed for screens and business cards, not for a panel seen from across the road. Ask your designer for a simplified vehicle version, such as the symbol besides the business name in a bold font.

Can I design my own vehicle signage layout?

Yes. Many owners start with a rough layout of their own. Before anything is printed, ask your signage provider to check it against your exact make and model, because door lines, handles and curves vary between vehicles.

Send an enquiry or get a quote

This enquiry will be sent to

Signs N Print

Enter your details